What to do if my Carel humiDisk shows a HIGH alarm?
If your Carel Humidifier displays a 'HIGH alarm', it indicates that the input has exceeded parameter P26 for a duration longer than parameter P28. To resolve this, carefully examine and adjust parameters P26, P27, and P28.
How to fix a memory error on a Carel humiDisk Humidifier?
A 'memory error' on your Carel Humidifier typically occurs due to a power failure during programming or memory damage from electromagnetic interference. Try restoring the default values. If that doesn't work, turn the instrument off and on again while holding the 'PRG' button. If the problem persists, the instrument may need to be replaced.
Why does my Carel humiDisk Humidifier display a probe error?
If your Carel Humidifier is showing a probe error, it could be due to a faulty or disconnected probe. You should check the connections to ensure they are secure and also check the probe signal.
What to do if Carel humiDisk Humidifier shows E08 error?
If your Carel Humidifier displays error code E08, it indicates either a power failure during programming or memory damage due to electromagnetic interference. To resolve this, try restoring the default values. If that doesn't work, turn the instrument off and on again while holding the “PRG” button. If the problem continues after these steps, the instrument may need to be replaced.
How to fix Carel humiDisk Humidifier E01 error?
If your Carel Humidifier displays error E01, it means the probe is either faulty or disconnected. You should check the probe connections and the probe signal.
General| Brand | Carel |
|---|---|
| Model | humiDisk |
| Category | Humidifier |
| Language | English |
Read and follow all instructions before installation or handling the appliance.
Information on disposing of the product according to WEEE regulations and national legislation.
Essential safety precautions to be observed before installation, operation, and maintenance of the appliance.
Details the suitable environments and industries for using the humiDisk humidifier.
Overview of the different humiDisk models, their production capacities, and specifications.
Information on optional electrical panels designed for controlling humiDisk65 humidifiers.
Details on external humidistats and humidity probes compatible with the humiDisk system.
Information on optional accessories available for the humiDisk65 model.
Visual and textual identification of the main components of the humiDisk and humiDisk65 units.
List of standard components included in the packaging for humiDisk and humiDisk65.
Required preparations, including power supply, water, and drain connections before operation.
Guidelines for optimal placement of the humidifier to ensure correct operation and maintenance access.
Step-by-step instructions for securely mounting the humidifier onto a wall.
Instructions for installing the humidifier using supporting chains and brackets.
Details on connecting the humidifier to the power supply and control systems.
Schematic diagrams illustrating the electrical wiring for UC10 and UC65 configurations.
Procedures for connecting the water supply and drain hoses to the humidifier unit.
Concluding steps for installation, including wire management and checking connections.
Essential checks to perform before powering on the humidifier for the first time.
Instructions on how to start and operate both humiDisk and humiDisk65 models.
Procedures for safely shutting down and stopping the humidifier unit.
Overview of the functions controlled by the electronic board, including capacity and cycles.
Explanation of how to configure the humidification capacity using dip-switches.
Steps to adjust the appliance's humidification output based on environmental needs.
Description of the automatic cycle to prevent water stagnation and bacterial growth.
Information on extending the washing cycle when using specific CAREL electrical panels.
Instructions for installing the optional antifreeze heater kit for low-temperature operation.
Procedure for cleaning the air filter to maintain optimal airflow and efficiency.
Steps for inspecting and cleaning the drain siphon to prevent operational issues.
Instructions for checking and cleaning the filter on the water fill solenoid valve.
Procedure to verify the correct periodic execution of the washing/emptying cycle for humiDisk65.
Procedures for preparing the unit for storage and checks upon returning it to service.
Guidelines for the proper recycling and disposal of the humidifier components.
Details on connecting and using the UCQ065D100 panel for controlling one humidifier.
Specific wiring instructions for connecting the UCQ065D100 panel to the humidifier terminals.
How to connect the phase, neutral, and earth wires to the UCQ065D100 electrical panel.
Instructions for wiring active humidity probes (DPPC, DPWC) to the UCQ065D100 panel.
Details on the relay outputs for alarm signals (probe, humidity, malfunction) on the panel.
Configuration for controlling the humidifier's operation remotely via a voltage-free contact.
Connecting the UCQ065D200 panel to control two humidifiers, including power and probes.
Wiring guide for connecting the UCQ065D200 panel to the first humidifier unit.
Wiring guide for connecting the UCQ065D200 panel to the second humidifier unit.
Instructions for connecting the power supply to the UCQ065D200 electrical panel.
Wiring instructions for connecting humidity probes to the UCQ065D200 panel.
Details on alarm outputs for the UCQ065D200 panel, covering various alarm types.
Configuration for remote ON/OFF control of humidifiers using the UCQ065D200 panel.
Guide to configuring essential parameters like set point, differential, and alarms.
Explanation of error messages and troubleshooting steps for the DN33Z9HR20 controller.
Specifications for the physical size and weight of the humiDisk model.
Specifications for the physical size and weight of the humiDisk65 model.
Detailed technical data including capacity, power, airflow, and operating conditions.
Detailed technical data including capacity, power, airflow, and operating conditions.
Technical details for the UCQ065D100 and UCQ065D200 electrical panels.
Technical specifications for the CAREL DN33Z9HR20 electronic humidistat.
Technical specifications for the UCHUMM0000 mechanical humidistat.
List of available spare parts for the humiDisk10 model with corresponding CAREL codes.
List of available spare parts for the humiDisk65 model with corresponding CAREL codes.
Diagnosing and resolving issues when the humidifier fails to power on or operate.
Troubleshooting steps for when air is distributed but water is not atomised.
Identifying and fixing the cause of the humidifier continuously draining water.
To Next Page