Need help?Do you have a question about the Carestream DENTAL CS 8 200 3D and is the answer not in the manual?
Specifies the intended use of the CS 8200 3D dental imaging system.
Outlines the advantages and performance characteristics of the CS 8200 3D.
Explains symbols and special messages used in the guide for safety.
Details essential precautions, cleaning, and disinfection procedures for the unit.
Covers symbols, labels, and their placement on the CS 8200 3D unit.
Lists relevant European and International standards for medical devices.
Details compliance with specific directives and regulations like EU MDR and FDA.
Provides core technical details of the CS 8200 3D system.
Specifies the minimum computer hardware and software for operation.
Information on radiation protection, pediatric dose, and safety measures.
Details technical specifications for imaging modalities and performance.
Presents stray radiation measurements for various imaging modes.
Details operating conditions and electrical power specifications.
Covers X-ray tube technical specs, filtration, and beam limitations.
Provides the address of the manufacturer and the factory location.
Lists contact points for authorized representatives and importers in various regions.
General| Imaging Technology | Cone Beam Computed Tomography (CBCT) |
|---|---|
| X-ray Tube Voltage | 60-90 kV |
| Voltage | 60-90 kV |
| Software | CS Imaging Software |
| Scan Modes | 3D, Panoramic, Cephalometric |
| 3D Field of View (FOV) | 5 cm x 5 cm |
| FOV | 5 cm x 5 cm |
| Generator | High Frequency |
| Compatibility | DICOM |
To Next Page