Need help?Do you have a question about the Carestream DENTAL CS 8100 Series and is the answer not in the manual?
General| Brand | Carestream DENTAL |
|---|---|
| Model | CS 8100 Series |
| Category | Dental equipment |
| Language | English |
Describes special messages like WARNING, CAUTION, Important, Note, and Tip used to convey critical information.
Illustrates the physical movement capabilities of the unit, including up/down and rotational movements.
Identifies and illustrates the primary functional components of the CS 8100 unit.
Details the specific functional components of the head and chin rest assembly.
Lists and describes the various accessories provided for patient positioning.
Explains the console on the head/chin rest used for correct patient positioning and alignment.
Describes the remote control used to initiate radiological image acquisition wirelessly.
Specifies mandatory computer system requirements and configurations for the imaging software.
Lists the primary software components: CS Imaging Software and Panoramic Acquisition Interface.
Provides a detailed overview of the user interface for acquiring panoramic images.
Details how to select different radiological exams within the Program pane.
Explains how to examine selected areas of interest in 2D+ slices across the jaw.
Describes how to select patient parameters affecting image quality and reconstruction.
Explains how to choose and manually adjust exposure parameters for image acquisition.
Provides essential steps and checks before switching on the unit and computer.
Outlines procedures to follow before using the unit after a month of inactivity.
Explains how to configure firewall or network settings to access the Acquisition Interface.
Provides step-by-step instructions to open and access the Panoramic Acquisition Interface.
Outlines prerequisites and initial steps for acquiring specific types of panoramic images.
Details how to set acquisition parameters by selecting patient type and dental arch morphology.
Provides instructions for acquiring a bitewing segmented panoramic image, including positioning.
Provides crucial steps for preparing and positioning the patient before image acquisition.
Explains how to launch the X-ray, manage acquisition, and post-acquisition steps.
Details the process for acquiring a 2D+ image, including patient selection and parameter setup.
Outlines the steps for acquiring a TMJ x4 image, including patient preparation and parameter settings.
Provides information on radiation emission dose compliance with EURATOM 97/43 Directive.
Describes the monthly maintenance task of wiping outer covers with a soft, dry cloth.
Recommends a general inspection by an authorized service technician annually.
Explains the monthly procedure to control and maintain optimum image quality.
Lists common error messages, their descriptions, and recommended actions to resolve them.
Provides the address of the manufacturer, Carestream Health, Inc.
Lists authorized representatives for different regions and product models.
To Next Page
