EN
502682 BELLOWS POSITIONING TOOL 1
(Tool not included)
ITEM PART NO. DESCRIPTION QTY REMARKS
KNIFED BELLOWS 1
193453 SHAFT SEAL
2
194177 PARTS LIST - Shaft & Bellows Assembly
Screw Item No. 6 (assembly
spigot) onto the piston shaft
(grease spigot with AMGD-
010).
193452
192887 RETAINING NUT 1
6
192881
7 502681 BELLOWS ASSEMBLY SPIGOT 1
(Tool not included)
1
3 193445 BELLOWS SPACER 1
1
Smear loctite 572 over nose
of bellows, thread nut onto
bellows ensuring the thread
starts squarely. Grip bellows
lightly by hand and tighten
the nut with a 1" A/F spanner
until the nut contacts the
bellows shoulder.
Using Item No. 7, push
bellows over spigot until
located in groove.
PISTON SHAFT 1
5
4
KEY
(Reverse for assembly)
LOCTITE
TORQUE
MAINTENANCE ORDER
GREASE INTERNAL
(AGMD-010)
GREASE
77-3330 R1.3 25/36 www.carlisleft.com
To Next Page
Loading...
