BT2 user manual - H-5911-9004-02-B Page | 38
6.2 Grease
The Boretrak2 probe incorporates a nose cone which acts as a battery compartment. This nose cone screws onto
the probe and is sealed with an O-ring above the retaining thread.
A tube of silicon grease is supplied with the Boretrak2. This grease should be lightly smeared on the O-ring to
ensure it is kept well lubricated and the probe retains its seal. Keep grease off the retaining thread.
6.3 USB drive
A USB drive is supplied with the Boretrak2 system. This is loaded with:
• Carlson Boretrak software for Windows.
• Carlson Boretrak software for Android.
• This Boretrak2 manual.
To Next Page
Loading...
