BT2 user manual - H-5911-9004-02-B Page | 63
9 Setting up Carlson Boretrak software on a Windows device
Carlson Boretrak software runs on a Windows or Android mobile device or on a Windows PC. This section
describes the process of installation and setup on a Windows device. Section 8 describes the same process on an
Android device.
The most recent version of Carlson Boretrak is always available from the downloads section of Carlson’s website.
Go to:
https://web.carlsonsw.com/files/updates/updates05.php
Select Carlson Boretrak for Windows from the dropdown list and download the *.EXE file.
9.1 Licensing and registration
Carlson Boretrak has a non-restrictive distribution license, so it may be installed on as many devices as required.
9.2 Recommended specs
Carlson Boretrak can be run in Desktop mode which is designed to be used in an office environment in conjunction
with a standard mouse, keyboard and large monitor.
Carlson Boretrak can also be run in Touch mode. This mode is optimized for use in the field on a touch-screen
tablet.
Carlson can supply Boretrak2 systems packaged together with a Windows tablet, suitable for field use. This tablet
is pre-installed with Carlson Boretrak software and pre-configured to optimize performance.
Alternatively, if you are independently selecting a Windows-based tablet to run Carlson Boretrak, consider the
following points when making your choice.
• Carlson Boretrak runs on 64-bit Windows PCs running Windows 10.
• The main compatibility requirement for Carlson Boretrak to run optimally is that the processor / GPU should
be able to support Vulkan API. A list of processors and GPUs compatible with Vulkan in Windows, is shown
here: https://en.wikipedia.org/wiki/Vulkan_(API)#Compatibility
. Processors which do not support the Vulkan
API may run Carlson Boretrak with limited graphic capabilities.
• Any tablet used in the field should be highly ruggedised to withstand the harsh conditions that are typical
for the applications in which the Boretrak2 hardware is used. An environmental protection rating of at least
IP65 is recommended.
• The battery capacity of the tablet should allow you to operate for a full day in the field.
• 300 MB free space is required on your tablet’s hard disk to install the software.
• 2 GB is the minimum recommendation for RAM installed in your tablet.
• Carlson recommends that you ensure that all Windows updates are current and that the latest drivers for
your graphics card are installed. Failure to update components may result in video or driver errors.
• Given the nature of Boretrak2 deployments, it is important that you should be able to attach a neck strap to
the tablet to allow you to have both hands free when appropriate.
• Features improving the readability of the screen in sunlight, and the response of the touchscreen in rain are
useful.
To Next Page
Loading...
Need help?
General
