Carlson BRx7 - Page 53

Page | 53
Carlson Software
Firmware Update (connued)
Updang
Firmware via
WebUI
(connued)
Updang Firmware via MicroSD Card
Using the WebUI, select Sengs and Device Conguraon. Under Device
Conguraon, locate the First Storage opon, and select the SD Card radio
buon.
Click the Save buon at the boom right of the screen.
Place the upgrade les under “update” folder of the MicroSD card. Version
info must be place aer the le name and separated by “_”.
The name must follow the naming convenon listed below.
Receiver rmware: BRx7_update_YYMMDD.bin YY: Year
MM: Month OD: Day
e.g. BRx7_update_160202.bin
Radio rmware: SATEL_update_XXXXX.bin XXXXX: version
e.g. SATEL_update_ V07.27.2.0.8.6.bin
3G module rmware: PHS_update_XXXXX.bin XXXXX: version
e.g. PHS_update_03.001.bin