3500D MACHINE MAINTENANCE
23
• Check hydraulic oil tank. A sight glass is
provided on the tank for easy viewing.
Keep filled to proper level.
• The machine is equipped with Citgo AW32
hydraulic oil at the time of manufacture.
• To access the jackshaft bearings you will
have to remove the jackshaft cover.
• Check setscrews in jackshaft bearings and
cutter wheel bearings for tightness (weekly).
• Clean out Poly Chain
® guard by removing
bottom portion of guard (weekly). Chip
buildup will wear or break Poly Chain
®
belt.
To Next Page
Loading...
