SP5014TRX SAFETY PRECAUTIONS
8
ATTENTION:
The Carlton® Model SP5014TRX Stump Grinder CAN be overturned on steep inclines.
This can cause serious injury to operator and machine. DO NOT OVERTURN!
Avoid steep side inclines when operating
this machine! The narrow design width
required in operating the model
SP5014TRX in tight confines makes it
susceptible to tipping over sideways.
Overturning this machine can result in
personal injury, property damage and/or
seizing the engine.
USE CAUTION.
Positioning the cutter wheel uphill and
as close to the ground as possible while
in transit will minimize the danger of
tipping over and maximize the
steadiness of the Model SP5014TRX.
When encountering a hill, the best
approach is straight up or straight down.
Avoid any side angles whenever
possible.
NEVER ALLOW INEXPERIENCED
PERSONS TO OPERATE THIS
MACHINE.
P/N 0700024
To Next Page