4-3-2. Start a operation
(1) Local operation mode
a) Confirm the "LOCAL" indication lamp of the key lights.
b) Keep pressing “RUN” key for more
than a second and make sure that
“RUN” indicator lamp of the key lights.
c)Automatic operation starts.
Local key
Run key
(2) Remote operation mode
a) Confirm the "REMOTE" indication lamp of the key lights.
Remote key
b) Turn on the start switch on the remote
control panel of field supply.
c) Automatic operation starts.
NOTE : In the local operation mode, a signal from the remote control panel is
not effective. In the remote operation mode, “RUN” key on the operation board
of the Chiller does not work.
4-4
To Next Page
Loading...
