12
4.5.2 - Schedule screen
one (OCCPC01S) is used for controlling the unit start/stop,
whereas the second one (OCCPC02S) is used for controlling
the dual setpoint.
and select Schedule Menu
Set the time schedule and the selected period will be
presented in the form of the green band on the timeline.
Press
to cancel changes.
1. Selection of the applicable days for the time schedule
2. Modication of the period: start time and end time
3. Save
4. Cancel
5. Previous time period
6. Next time period
4.5.3 - Override screen
The override screen provides the option to issue the command
overriding the current operation of the unit. To access the
override screen, press the forceable point of the data screen.
Press to set or to remove the forced point.
To Next Page
Loading...
