Page 37
5. Step motor
Note: Remove the front panel and electrical parts (refer to 1. Front panel, 2. Electrical parts) before
disassembling step motor.
Procedure Illustration
1) Remove the two screws, then remove the
stepping motor (see CJ_OP_INV_021).
CJ_OP_INV_021
6. INTELLIGENT EYE
Note: Remove the front panel and electrical parts (refer to 1. Front panel, 2. Electrical parts, 3. Evaporator
and 4. Fan motor and fan) before disassembling step motor.
Procedure Illustration
1) Remove the 1 screw, then remove the
intelligent eye. (see CJ_OP_INV_021).
CJ_OP_INV_021
Note: This section is for reference only. Actual unit appearance may vary.
Stepping Motor
Intelligent Eye
To Next Page
Loading...
