Carrier 42QHP09E8S - Outdoor Unit

Maintenance and
Disassembly
 Page 38 
2.2 Outdoor unit
1. Panel Plate
Procedure Illustration
1) Turn off the air conditioner and the
power breaker.
2) Remove the screws of the big handle
and then remove the big handle
(1 screws) (see CJ_B30_INV_001).
3) Remove the screws of the top cover
and then remove the top cover (3
screws). One of the screws is located
underneath the big handle (see CJ_
B30_INV_002).
CJ_B30_INV_001
CJ_B30_INV_002
Note: This section is for reference only. Actual unit appearance may vary.
Top Cover
Big Handle
38QHP12E8S38QHP09E8S