Carrier 42QHP09E8S - Page 45

Maintenance and
Disassembly
 Page 41 
2. Fan disassembly
Note: Remove the panel plate and (refer to 1. Panel plate) before disassembling fan.
Procedure Illustration
1) Remove the nut securing the fan
with a spanner (see
CJ_ODU_
INV_001
).
2) Remove the fan.
3) Unfix the hooks and then open the
electronic control box cover (4 hooks)
(see
CJ_ODU_INV_002
).
CJ_ODU_INV_001
CJ_ODU_INV_002
Note: This section is for reference only. Actual unit appearance may vary.
Hook
D-cut
38QHP09E8S 38QHP12E8S