1 42XPP
Hi-Wall
System description ................................ 1
Dimensions and clearances .................. 1
Installation material ............................... 2
Accessories .......................................... 2
Installation ............................................ 2 - 3
Refrigerant connections ........................ 3
Electrical connection ............................. 4
Installing remote control bracket ............ 4
Maintenance ......................................... 4 - 5
Guide for the owner ............................... 5
Useful info ............................................. 5
System description
Dimensions and clearances
Contents Page
Page
System description (See fig. 1)
R. Outdoor unit
S. Indoor unit
T. Remote Control (if foreseen)
1 Automatic swinging louvre
2 Air return
3 Airlters
4 Air outlet
5 Remote control signal receiver
6 Unit operating status indicators
7 Unit nameplate
8 Interconnecting tubing
9 Condensate drain
Indoor unit display (See fig. 2)
Blue light: illuminated during Ionizer activated
Orange light: illuminated during timer mode.
Green light: illuminated during operation.
TEST operation:
Is exclusively used by service personnel to test unit
operation.
The test procedure is activated via the remote control.
EMERGENCY Button (See fig. 3)
Can be used when the remote control is lost or
inoperative.
d Emergency Button
Emergency operation:
When the unit is in the OFF mode and the T button is
pressed for 5 seconds, the unit will operate as follows:
•Automaticmode
•Temperaturepresetto22°C(050,070)or25°C(100)
•Automaticfanspeed
•Louvressetautomaticallyaccordingtotheoperating
mode
•OFFtimer
When a signal is received by the remote control, the unit
operates accordingly.
Unit dimensions references (mm) are shown in fig. 4 Minimum installation clearances references are (mm)
shown in fig. 6
42XPP
A B C X Y Z W
050 - 070
1080 295 200 14 300 450 120 2000
100
1460 340 240 23 300 450 120 2000
To Next Page
Loading...
