Carrier 48FC 08-16 Series - APPENDIX F - LOW AMBIENT CONTROL SENSOR LOCATION; 7.5 Ton Outdoor Circuiting; 8.5 Ton to 10.0 Ton Outdoor Circuiting; 15.0 Ton Outdoor Circuiting

121
APPENDIX F — LOW AMBIENT CONTROL SENSOR LOCATION
Fig. X — 48FC**08-16 Outdoor Circuiting
SENSOR POSITION
4TH INTERMEDIATE
FROM TOP
SEE NOTE #1
TOP OF COIL
NOTE(S):
1. Apply conductive grease supplied with
coil sensor (item #1) on specified leg
before attaching sensor to location
with wire tie (item #5).
2. Not available for 12.5 ton unit. That
unit uses an ECM motor control.
7.5 Ton Outdoor Circuiting 8.5 Ton to 10.0 Ton Outdoor Circuiting
15.0 Ton Outdoor Circuiting
TOP OF OUTDOOR COIL
SENSOR POSITION
SEE NOTE #1
TOP OF COIL
SENSOR POSITION
4TH INTERMEDIATE
FROM TOP
SEE NOTE #1