2−2T-364
2.1.3 Evaporator Section
The evaporator section is shown below. The evaporator
fans circulate air through the container by pulling it in the
top of the unit, directing it through the evaporator coil,
where it is heated or cooled, and discharging it at the
bottom.
Most evaporator components are accessible by remov-
ing the upper rear panel (as shown in the illustration) or
by removing the evaporator fan access panels (see
Figure 2−1).
1
2
3
4
5
6
7
8
9
10
11
12
13
1. Evaporator Fan Motor #1 (EM1)
2. Return Recorder Sensor/Temperature Sensor
(RRS/RTS)
3. Humidity Sensor (HS)
4. Evaporator Fan Motor #2 (EM2)
5. Evaporator Coil Heaters (Underside of Coil)
6. Evaporator Coil
7. Electronic Expansion Valve (EEV)
8. Evaporator Temperature Sensors (Location)
(ETS1 & ETS2)
9. Interrogator Connector (Rear) (ICR)
10. USDA Probe Receptacle PR2
11. USDA Probe Receptacle PR1
12. USDA Probe Receptacle PR3
13. Cargo Probe Receptacle PR4
Figure 2−2 Evaporator Section