Fig. 5 — Unit Dimensions — 42BHE Fan Coil Base Unit with Electric Heat Option
NOTES:
1. Right hand shown, Left hand opposite.
2. All dimensions are +/- 1/4” (+/- 6 mm).
3. Drain pan removal is on the piping side of the unit.
4. Allow adequate spacing or maneuverability of unit to allow service through recommended access area.
5. Dimensions in parenthesis are in millimeters.
6. “C” dimension is measured from coil side of unit.
7. Product specifications are subject to change without notice.
8. Mixing Box option will vary return duct dimensions, refer to mixing box details, Fig. 19 page 18.
UNIT
42BHE
DIMENSIONS — in. (mm)
Supply Duct
M
AB C D
06 8-7/8 (225) 10-1/2 (267) 14-1/2 (368) 2-1/4 (57) 2 (51)
08 8-7/8 (225) 10-1/2 (267) 14 (356) 2-1/4 (57) 2 (51)
10 10-3/8 (264) 11-5/8 (295) 15-1/4 (387) 2-1/4 (57) 2 (51)
12 10-3/8 (264) 11-5/8 (295) 14 (356) 2-1/4 (57) 2 (51)
16 13-7/8 (352) 12-3/4 (324) 16-3/4 (425) 2-1/4 (57) 1-1/2 (38)
20 13 (330) 13-3/4 (349) 17-3/4 (451) 2-1/4 (57) 2 (51)
30 16-1/4 (413) 13-3/4 (349) 16 (406) 7-1/4 (184) 2 (51)
40 16-3/4 (425) 16-1/8 (410) 22-3/4 (578) 6-1/4 (159) 2 (51)
To Next Page
Loading...
