Carrier Connect 33CONNECTSTAT43 - Filter

Using the Carrier® Connect™ Wi-Fi Thermostat's screens
33CONNECTSTAT43 ©2022 Carrier.
Installation Guide All rights reserved.
33
Screen Name/Description
Default and Range
PROX SENSITIVITY — Change the proximity sensing feature from HIGH to MEDIUM
to LOW. Increasing the sensitivity increases the range the sensor can detect
presence, but also increases the possibility of a false presence.
D:
R:
MEDIUM
HIGH/MEDIUM/LOW
# PROGRAM DAY PARTS — Number of periods per day for programming
occupancy
D:
R:
2
2 or 4
DST — Enable or disable automatic Daylight Saving Time change in the
thermostat
D:
R:
ENABLED
DISABLED/ENABLED
WIRELESS — Enable or disable Wi-Fi for the thermostat. If disabled, then the Wi-Fi
radio in this product is turned off and functions, such as the following, are not
available:
• Sync Time To Server
• Outdoor Temperature via Wi-Fi Geo location
• Server & Wi-Fi Errors
• Remote Access Services via app or Web
CAUTION If you disable this function after the thermostat has been set up
and connected to the local Wi-Fi network, you must set it up again using the
mobile App.
D:
R:
ENABLED
ENABLED/DISABLED
SOUND — Adjust the sound made when touching the thermostat
D:
R:
CLICK
OFF, CLICK, or BEEP
FILTER
Available on the thermostat only.
Use to reset the FILTER ALERT and see the FILTER RESET REMINDER timer information. Press the RESET button
to reset the timer to its configured value in the advanced SYSTEM SETTINGS. See To configure advanced SYSTEM
SETTINGS (page 14).