EasyManua.ls Logo

Carrier Connect 33CONNECTSTAT43 - Document Revision History

Carrier Connect 33CONNECTSTAT43
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Document revision history
33CONNECTSTAT43 ©2022 Carrier.
Installation Guide All rights reserved.
49
Important changes to this document are listed below. Minor changes such as typographical or formatting errors are not
listed.
Date
Topic
Change description
Code*
8/16/22
To configure advanced SYSTEM
SETTINGS
Added FILTER, updated DEVICE ID and DEVICE OBJECT NAME
C-TS-AP-E-RD
Filter Status
Updated definition
HOME
Clarified Equipment Status
Appendix
Added to BACnet points, updated Low Cool Lockout and Low
Heat Lockout
1/22/21
To wire for BACnet communication
Added 115.2 kbps baud rate
C-CP-E
7/17/20
BACnet Points List
Corrected BACnet BMS Occupancy to GATED_WRITE from
READ_ONLY
C-CP-E
2/28/20
Entire book
Updated logos
C-D
1/6/20
Entire book
Updated throughout for BACnet capabilities
C-CP-E
9/27/19
Registering and setting up a mobile
device for enhanced access
Removed reference to a 7-day limit for mobile devices
C-TS-CP-E
BACnet Integration
New
C-TS-CP-E
To connect a remote input ((sensor or
contacts)
Added SAT to list of inputs.
C-TS-CP-E
Appendix: BACnet Points List
New
C-ST-CP-E
To configure advanced SYSTEM
SETTINGS
Added SAT to REMOTE SENSOR
Added BACnet parameters
C-ST-CP-E
8/28/19
Humidity
Removed note limiting output use
C-ST-CP-E
12/2/22
Fault Definitions
Added line to ID temp sensor high and low.
* For internal use only
Document revision history

Related product manuals