63
Table 42B — Thermistor Temperatures (
°
C) vs Resistance/Voltage Drop
(NOTE: These values do NOT Apply to the Motor Temperature Thermistors)
TEMP
(C)
VOLTAGE
DROP
(V)
RESISTANCE
(Ohms)
TEMP
(C)
VOLTAGE
DROP
(V)
RESISTANCE
(Ohms)
TEMP
(C)
VOLTAGE
DROP
(V)
RESISTANCE
(Ohms)
–40 4.896 168,230 10 3.680 9,949 60 1.291 1,244
–39 4.889 157,440 11 3.633 9,485 61 1.258 1,200
–38 4.882 147,410 12 3.585 9,044 62 1.225 1,158
–37 4.874 138,090 13 3.537 8,627 63 1.192 1,118
–36 4.866 129,410 14 3.487 8,231 64 1.160 1,079
–35 4.857 121,330 15 3.438 7,855 65 1.129 1,041
–34 4.848 113,810 16 3.387 7,499 66 1.099 1,006
–33 4.838 106,880 17 3.337 7,161 67 1.069 971
–32 4.828 100,260 18 3.285 6,840 68 1.040 938
–31 4.817 94,165 19 3.234 6,536 69 1.012 906
–30 4.806 88,480 20 3.181 6,246 70 0.984 876
–29 4.794 83,170 21 3.129 5,971 71 0.949 836
–28 4.782 78,125 22 3.076 5,710 72 0.920 805
–27 4.769 73,580 23 3.023 5,461 73 0.892 775
–26 4.755 69,250 24 2.970 5,225 74 0.865 747
–25 4.740 65,205 25 2.917 5,000 75 0.838 719
–24 4.725 61,420 26 2.864 4,786 76 0.813 693
–23 4.710 57,875 27 2.810 4,583 77 0.789 669
–22 4.693 54,555 28 2.757 4,389 78 0.765 645
–21 4.676 51,450 29 2.704 4,204 79 0.743 623
–20 4.657 48,536 30 2.651 4,028 80 0.722 602
–19 4.639 45,807 31 2.598 3,861 81 0.702 583
–18 4.619 43,247 32 2.545 3,701 82 0.683 564
–17 4.598 40,845 33 2.493 3,549 83 0.665 547
–16 4.577 38,592 34 2.441 3,404 84 0.648 531
–15 4.554 38,476 35 2.389 3,266 85 0.632 516
–14 4.531 34,489 36 2.337 3,134 86 0.617 502
–13 4.507 32,621 37 2.286 3,008 87 0.603 489
–12 4.482 30,866 38 2.236 2,888 88 0.590 477
–11 4.456 29,216 39 2.186 2,773 89 0.577 466
–10 4.428 27,633 40 2.137 2,663 90 0.566 456
–9 4.400 26,202 41 2.087 2,559 91 0.555 446
–8 4.371 24,827 42 2.039 2,459 92 0.545 436
–7 4.341 23,532 43 1.991 2,363 93 0.535 427
–6 4.310 22,313 44 1.944 2,272 94 0.525 419
–5 4.278 21,163 45 1.898 2,184 95 0.515 410
–4 4.245 20,079 46 1.852 2,101 96 0.506 402
–3 4.211 19,058 47 1.807 2,021 97 0.496 393
–2 4.176 18,094 48 1.763 1,944 98 0.486 385
–1 4.140 17,184 49 1.719 1,871 99 0.476 376
0 4.103 16,325 50 1.677 1,801 100 0.466 367
1 4.065 15,515 51 1.635 1,734 101 0.454 357
2 4.026 14,749 52 1.594 1,670 102 0.442 346
3 3.986 14,026 53 1.553 1,609 103 0.429 335
4 3.945 13,342 54 1.513 1,550 104 0.416 324
5 3.903 12,696 55 1.474 1,493 105 0.401 312
6 3.860 12,085 56 1.436 1,439 106 0.386 299
7 3.816 11,506 57 1.399 1,387 107 0.370 285
8 3.771 10,959 58 1.363 1,337
9 3.726 10,441 59 1.327 1,290
THERMISTOR JACKETED CABLE SENSOR TUBE BEND SLIGHTLY BEFORE WELL INSERTION
3/16 in.
4 in.
THERMISTOR WELL
X
COOLER
MEASURE TO TOP
OF WELD COUPLING
FOR PROPER
INSERTION
(SEE TABLE 44)
PACKING NUT
FERRULE
PLUG END
Fig. 23 — Thermistor (Liquid Level Sensor) Replacement
Fig. 22 — Thermistor Replacement (T1, T2, T5, or T6)
To Next Page
Loading...
