To Next Page
A
Amy GonzalezSep 9, 2025
How to fix a firmware error on Carrier i-Vu XT?
- LlyoungSep 9, 2025
To fix a firmware error, download the driver again.
How to fix a firmware error on Carrier i-Vu XT?
To fix a firmware error, download the driver again.
What to do if BACnet Device ID is not set on Carrier Network Router?
If the BACnet Device ID is not set, download the router.
What to do if Linux is running but it could not start the firmware application on Carrier i-Vu XT Network Router?
If Linux is running but the firmware application could not start, download the driver.
What to do if my Carrier Recording Equipment has an Ethernet connection problem?
If you are experiencing Ethernet connection issues with your Carrier Recording Equipment, ensure that the Ethernet cable is securely connected. If the problem persists, examine other network components to identify any potential faults.
What to do if the current default IP address of my Carrier Recording Equipment does not match the current rotary switch setting?
If the default IP address of your Carrier Recording Equipment doesn't match the rotary switch setting, you have a few options: 1. Use the controller setup Ports tab to configure the IP address. 2. Cycle the power to accept the new IP address. 3. Alternatively, adjust the rotary switches to align with the current default IP address.
General| Brand | Carrier |
|---|---|
| Model | i-Vu XT |
| Category | Network Router |
| Language | English |
