Installation & Commissioning Manual:
Neos 100S, 20X, 30S, 35X, 40X, 50X
62-11165 Rev D
®
19
Cab Command Installation
Route the cab command harness to the interior of the vehicle
Protect the harness from all sharp sheet metal
Make sure the harness is not in contact with anything hot
Make certain the harness is secured from vibration
Mount the cab command in a accessible location
where it may not be damaged; for example, where
the rear view mirror would otherwise be mounted.
Be careful not to damage any of the vehicle hoses or wires.
If it is mounted in the dashboard, keep as far as possible from heating ducts.
Maximum exposure temperature: 158°F (70°C).
Do not mount it where it can be exposed to constant, direct sunlight
To Next Page
Loading...