Installation & Commissioning Manual:
Neos 100S, 20X, 30S, 35X, 40X, 50X
62-11165 Rev D
®
5
Condenser Installation – Roof Top Application
30S
28.35” (720)
4 x Ø 0.56”
(4 x Ø 15)
12.20”
(310)
Note: For 30S, use the black marking on the
bottom cover of the unit as a template for drilling
the large refrigerant and electrical pass-thru hole.
Roof Top Applications
Mark and drill the four condenser
mounting holes, as well as the
larger refrigerant and electrical
pass-thru hole, as indicated
above (depending on unit model)
21.65” (550)
14.57” (370)
8.86”
(225)
4 x Ø 0.56”
(4 x Ø 15)
Ø 3.50”
(Ø 90)
3.54”
(90)
1.25” to 9.25”
(30 to 235)
NEOS 100S
20X
35X
To Next Page
Loading...