When the air conditioning unit is off, into the query function of
temperature, press“ ”or “ ”to select rEC. ON or OF will be
displayed in the temperature area to indicate whether it is valid
or invalid.
When the selection is invalid, the wire controller does not process
any remote control signals.
Press “Confirm” into setting state, press“ ”or “ ”to select ,
then press “Confirm” to complete it.
In QUERY Mode, press “ ”or “ ” to select rEC.
Press “Confirm” into setting state, press “ ”or “ ” to select the
temperature, then press “Confirm” to complete it.
The highest setting temperature range : 77°F ~ 86°F (25°C ~ 30°C)
The lowest setting temperature range: 63°F ~ 75°F (17°C ~ 24°C)
: Highest value setting function.
: Minimum value setting function.
Remote control function selection of wire controller
To Next Page
Loading...
