High Wall Type
Owner’s Manual
–18–
EN
Hi POWER operation
• The Hi POWER mode automatically controls
room temperature, airflow and operation mode
so that the room is quickly cooled in summer and
warmed in winter.
Setting Hi POWER mode
1 Hi POWER button
Press the Hi POWER button after starting any
operation. At the same time, the “Hi POWER” mark
on the remote control is indicated.
Cancelling Hi POWER mode
1 Hi POWER button
Press the Hi POWER button once again.
At the same time, the “Hi POWER” mark on the
remote control goes off.
CAUTION
• The Hi POWER mode cannot be activated in
the DRY and FAN ONLY operation and when
the ON TIMER operation is reserved.
• Hi POWER mode is not available for group
control.
When Hi POWER is transmitted to the Header
indoor unit, the receiving sound is heard but the
Hi POWER mode will not be performed. Please
cancel the Hi POWER mode.
Quiet operation
• The QUIET mode provides quiet operating
status by automatically setting the fan speed to
the lowest speed.
Setting QUIET mode
1 QUIET button
Press the QUIET button after starting any operation.
At the same time, the mark is indicated.
Cancelling QUIET mode
1 QUIET button
Press the QUIET button once again.
At the same time, the mark on the remote control
goes off.
CAUTION
The QUIET mode cannot be activated in the DRY
operation.
NOTE
Under certain conditions, the quiet operation may
not provide adequate cooling or heating due to the
feature of quietness.
TEMP
1
TEMP
1
18-EN
+001111053801_00Ta.book Page 18 Friday, January 21, 2011 3:52 PM
To Next Page
Loading...
