Carrier MMK-AP0073H2UL - Adjusting Airflow Direction

High Wall Type
Owner’s Manual
–20–
EN
 Adjusting airflow direction
• Adjust the airflow direction properly. Otherwise, it
might cause discomfort and make the room
temperature uneven.
• Adjust the vertical airflow using the remote
control.
• Adjust the horizontal airflow manually.
Adjust the vertical airflow
The air conditioner automatically adjusts the
vertical airflow direction in accordance with the
operating conditions when AUTO or A mode is
selected.
To set the airflow direction you desire
Perform this function when the air conditioner is in
operation.
1 FIX button
Keep pressing or pressing briefly the FIX button on
the remote control to move the louver in the desired
direction.
• In subsequent operations, the vertical airflow is
automatically set in the direction to which you
adjusted the louver using the FIX button.
NOTE
Operating angle of vertical airflow louver will be
different during cooling, dry and heating operation.
To automatically swing the airflow
direction
Perform this function when the air conditioner is in
operation.
1 SWING button
Press the SWING button on the remote control.
• To stop the function, press the SWING button.
TEMP
1
TEMP
1
20-EN
+001111053801_00Ta.book Page 20 Friday, January 21, 2011 3:52 PM