High Wall Type
Owner’s Manual
–26–
EN
2. Wipe the grill with a soft, dry cloth.
If necessary, a mild liquid detergent can be applied
and wiped off with a dry cloth.
3. Fit the left and right arms of the air inlet grille to the
shafts on the two sides of the air conditioner and push
in completely, and then push in the centre arm.
4. Check that the centre arm has been completely
inserted and close the air inlet grille.
• Push the arrow locations (four) at the bottom of the
air inlet grille to check whether the grille is
completely closed.
Preparing for long Shut Down Period
1. Clean the filters and reposition them in unit.
2. Operate the unit in fan mode for 3 or 4 hours to dry all
internal parts.
3. Turn the unit off and disconnect the main power
supply.
4. Before unit is turned on again, turn the circuit breaker
for at least 12 hours.
26-EN
+001111053801_00Ta.book Page 26 Friday, January 21, 2011 3:52 PM
To Next Page
Loading...
