10
Programming the Control
Press the period ( 14. ) button twice. P2 will ash on
the display.
To change the hours, press the start time ( 15.
)
button.
Press home ( 16.
), away ( ) or sleep ( ).
Press the mode (M) button to set the Zone mode 17.
either ON or OFF.
Press hold ( 18.
) button to set the Silent mode either
ON or OFF.
Similarly you can program P3, P4, P5 and P6.19.
If you did not select 1 to 7 when you started this 20.
process, then repeat all the steps for your remaining
timeframe choice – 1 to 5, 6 to 7 or individual day :
1, 2, 3, 4, 5, 6, 7
To conrm that the thermostat has accepted your 21.
changes, cycle through the six time periods by
pressing days (
), selecting your time frame – 1 to
7(all days), 1 to 5(weekdays), or 6 to 7(weekends) or
individual day : 1, 2, 3, 4, 5, 6, 7 – and then pressing
the period (
) button to see the Touch ‘N’ Go option
assigned for each start time, Zone Mode Setting and
Silent Mode setting. Each time you press period (
),
you will advance to the next start time.
Press OK button or close the lid.22.
English
To Next Page
Loading...
