11
Advanced Programming Options
Advanced programming display codes
You can customize several system parameters.
Refer to the main unit documentation for the complete list
and description of paramenters.
Changing / holding the temperature
You can temporary change temperature settings in one
zone (using the NUI placed in that zone).
Open the lid.1.
Press the zone button ( 2.
)to select zone 0.
Press up or down buttons on the right side until you 3.
reach the desired temperature setting. This creates a
“temporary hold” until the next pre-set time period.
You will see schedule active icon
(
) ashing on the display.
To maintain that temperature setting so it doesn’t 4.
change during the next pre-set time period, press
hold (
) symbol button on the left side. The
temperature will stay at the setting you selected until
you release the hold. The schedule active icon (
)
will disappear.
To return the temperature to the pre-set level for that 5.
time period, press hold (
) symbol. This releases
the hold and the temperature will return to its
programmed level. The schedule active icon (
) will
appear.
Close the lid.6.
Changing user settings
Now you can change the settings of dierent features with
the NUI. Here is how you can program you thermostat
settings.
Open the lid.1.
Press home ( 2.
) and away ( ) buttons and
hold for 3 seconds. You will see parameter number “1”
is ashing in the time display area.
Press mode (M) button, you will see parameter value 3.
will be ashing in the temperature display area of the
display.
Press up or down buttons to change the settings to 4.
English
To Next Page
Loading...
