Carrier NUI 33AW-CS2 - Special Features; Room Temperature Sensor Adjustment; Shortcut to Silent Mode; Keyboard Lock

13
NUI oers a feature where you can add or subtract an oset
to the displayed room temperature. This allows the NUI to
display the correct temperature of the room even if the NUI
or the room temperature sensor is installed at a location
where there is a slight dierence in temperature.
In this case, the TROOM SENSOR ADJ variable can be
modied in a range of +5°C / -5°C and this value will be
mathematically added to the real Room sensor value. Refer
to the parameters table in the main unit documentation.
Special Features
Room Temperature Sensor Adjustment
Short-Cut to Silent Mode
Press the Hold ( ) key for 10 seconds to make Silent mode
active. Deactivate Silent mode by pressing the Hold (
) key
again for 10 seconds.
When Silent mode is active, NUI will display the (
)
Icon. If Silent mode is active, this will always override the
selection done in program schedule.
Keyboard Lock
Clock
To Lock all key and block command functions
Open the lid1.
Press and hold for 3 seconds the three buttons days 2.
(
), period ( ) and start time ( ).
All the keys will be disabled and the lock icon ( 3.
) will
be visible on display.
To unlock the keyboard press again the three buttons 4.
for 3 seconds. The lock icon (
) will disappear.
The clock will continue to operate for 8 hours while power
is removed.
English