17 62-12002
12. Function Change (continued)
3. Press the up or down arrow keys to scroll through the function sub-
menus list.
4. Press the = (Enter) key when the submenu requested is displayed.
The submenus are TIMER, TEMP, SETTING, SS PARAM, MODE,
OTHER.
5. Press the up or down arrow keys to scroll through the functions in a
sub-menu.
6. Press the = (Enter) key while the function is being displayed to
change the value.
7. Press the up or down arrow keys to change the value. Then, press
the = (Enter) key to lock in the change.
To Next Page
Loading...
