11
and their factory defaul t sett i ngs. Not all numbers are used in the Comfort Seri es
because not al l options ar e avai l abl e in this series -- and numbering is consi s t ent across
the TB, TC, and TP thermostat lines.
Configuration Options -- Summary:
Option 01 -- Equipment type
Option 03* -- Fahrenheit/Centigrade
Option 04 -- Fan (G) on with W output
Option 07 -- Zoning
Option 10 -- Reversing valve
Option 11 -- Minimum deadband between heating and cooling setpoints
Option 12 -- Smart Recovery (programmable models only)
Option 13 -- Room air temperature offset adjustment
Option 15 -- Auto Changeover availability
Option 16 -- Maximum cycles per hour
Option 17 -- Time b etween equipment stages
Option 18* -- Continuous backlighting
Option 21* -- Keypad lockout
Option 24* -- Programm abl e/non--programma bl e (progr ammable models only)
Option 25* -- Number of programmable p eriods per day
Option 26 -- Minimum cooling setpoint
Option 27 -- Maximum heating setpoint
Option 99 -- Reset to factory defaults
Those options marked with an asterisk are also adjustable by the homeowner. See
Owner’s Manual for further information.
To Next Page
Loading...
Need help?
General
