Carrier Transicold Vector - Starting and Operating Modes; Auto Start; Stop Operation; Manual Operation Guide

MGC
EASY TO
START
Auto Start / Stop
SETPOINT
BOX TEMPERATURE
START/RUN
STOP
1
0
STANDBY
ENGINE
LANGUAGE
CONTINUOUS
RUN
START-STOPALARMDEFROSTCOOLHEAT
MANUAL
DEFROST
ALARM LIST
START-STOP
CONTINUOUS
SELECT
=
!
Place RUN/STOP switch
in RUN position.
Press the START-STOP/CONTINUOUS key until
the START-STOP light on the controller
illuminates.
Toggle the LANGUAGE switch as soon
as you select 1 of the 8 available
languages :
English - French - Spanish - German -
Danish - Dutch - Italian - Russian.
3
3
Verify that “START/STOP MODE SELECTED” is
displayed on the message center and that the
START-STOP light is illuminated.
EASY TO
RUN
Manual Operation
SETPOINT
BOX TEMPERATURE
START/RUN
STOP
1
0
STANDBY
ENGINE
LANGUAGE
CONTINUOUS
RUN
START-STOPALARMDEFROSTCOOLHEAT
MANUAL
DEFROST
ALARM LIST
START-STOP
CONTINUOUS
SELECT
=
!
Place the ENGINE/STANDBY switch
to ENGINE.
While preheating place RUN/STOP switch
to RUN.“MANUAL START MODE SELECTED”
will appear in message center.
Place manual GLOW/CRANK switch (MGC) to
Glow and hold for 5 to 15 seconds.
2
2
3
3
4
4
Place GLOW/CRANK switch in CRANK position
to crank and start.
Electrical box
(located inside
unit roadside
front door).
1
1
START/STOP MODE SELECTED
1
1
2
2
4
4