Carrier TruVu ET Display7 - To Update the Touchscreen; To Clear the Cache

Setting up the TruVu™ ET display
TruVu™ ET Display (part# EQT3) ©2022 Carrier.
Installation and Start-up Guide All rights reserved.
12
App Restart
Restart the TruVu™ ET display application on the device.
To update the touchscreen
To update the TruVu™ ET display software, do the following.
NOTE: You must have a USB drive that is FAT32 compatible and no more than 32GB.
1 Download the latest TruVu™ ET display zip file and associated .MD5 file, for the appropriate model, to the
root directory of your USB drive.
2 Insert the USB drive into the USB port on the TruVu™ ET display.
3 Swipe the screen on top to open the Quick Pane menu and select OTA Updater.
4 Click Update Image when it becomes enabled.
5 Select the radio button on the available firmware to begin the installation.
6 After the installation, select Reboot Now.
To clear the cache
1 The cache must be cleared before a file appears on the device. If a file already appears on the device, go to
the
Quick Settings pane, and tap App Restart before proceeding to the next step.
2 When the view file begins loading, tap Cancel.