Forcing values (CCN points only)
TruVu™ ET Display (part# EQT3) ©2022 Carrier.
Installation and Start-up Guide All rights reserved.
41
If a point has been set up to allow users to force the value, tap the value on the screen to open a dialog box that
allows you to set the value you want. Only points created with CCN microblocks can be set to be forced. A forced
point appears surrounded by a yellow border.
You can force:
• Numeric values such as temperature
NOTE When editing a numerical value, Auto releases the force back to the systems automatic setting.
• Binary values such as check boxes or text toggles
Forcing values (CCN points only)
To Next Page
Loading...