Carrier TruVu ET Display7 - Setting Timeouts

Setting timeouts
TruVu™ ET Display (part# EQT3) ©2022 Carrier.
Installation and Start-up Guide All rights reserved.
32
There are three timeouts available in the TruVu™ ET display. See the table below for descriptions and
functionality.
Name
Description
Notes
Screen Timeout
Adjust the length of time before the
device goes to sleep.
• Logs the user out
• Can be overridden by Extended Screen
Timeout (page 16)
• Found in
Quick Settings
, see To Edit the
touchscreen settings (page 10)
Extended Screen
Timeout
Adjust the length of time before the
device goes to sleep. This option has
longer timeout options than Screen
Timeout.
•
Logs the user out
• Overrides Screen Timeout
•
Found in
Application Settings
, see TruVu™
ET display screens (page
16)
Inactivity Timeout
Allows you to select the number of
minutes of inactivity until the Standby
screen appears.
• Logs the user out
• Can be disabled
• Found in
Application Settings
, see TruVu™
ET display screens (page 16)
NOTE If the Inactivity Timeout is set for a shorter time than Screen Timeout, the user is logged out before the
device goes to sleep.
Setting timeouts