Carrier TruVu ET Display7 - Specifications

What is the TruVu™ ET display?
TruVu™ ET Display (part# EQT3) ©2022 Carrier.
Installation and Start-up Guide All rights reserved.
2
Specifications
TruVu™ ET display7
TruVu™ ET display10
Power
24 VDC (±15%), 1 A, Class 2 24 VDC (±15%), 1 A, Class 2
Display: TFT
Resolution
Brightness
Contrast ratio
Viewing angle
Max colors
Touch
7" TFT (Widescreen)
1024 x 600 pixels (170 ppi)
320 cd/m (typ.)
1000:1 (typ.)
-75~70(H); -75~75(V)
16.7M (8-bit)
Projected Capacitive Multi-Touch (P-CAP)
10.1" TFT (Widescreen)
1280 x 800 pixels (149 ppi)
350 cd/m (typ.)
800:1 (typ.)
-85~85(H); -85~85(V)
16.7M (8-bit)
Projected Capacitive Multi-Touch (P-CAP)
Operating Conditions
-4°F to 122°F (-20°C to 50°C), 10% to 90% RH (non-condensing)
Front IP65 Water and Dust Proof (Rear: IP20); Vibration tested to IEC60068-2-64
Storage
Temperatures
-13°F to 158°F (-25°C to 70°C)
Communication
Comm Input
USB
USB OTG
LAN
2-wire EIA-485 port for connection to the Rnet sensor network (115kbps)
Port for upgrades, screen captures, file transfers, and controller communication for i-Vu® XT
or TruVu™ controllers
Port for factory programming (firmware upgrades)
RJ-45 Ethernet connection to Service Port on TruVu™ controllers
System
Processor
System Memory
Storage
OS: Android 11.0
MT8365 Quad-core Cortex-A53 up to 2.0GHz
3 GB LPDDR4 RAM to store variable data and LCD data.
32 GB onboard eMMC Flash memory to store program code and screen file
Mounting
Wall or panel mounting within the building interior
Wall mounting kit (7” and 10” only)