Creating or viewing schedules
TruVu™ ET Display (part# EQT3) ©2022 Carrier.
Installation and Start-up Guide All rights reserved.
36
To set up scheduling functionality
You can define BACnet schedules for each time clock microblock in the controller's control program(s).
To allow a user to create schedules in the TruVu™ ET display:
1 In the i-Vu® or Field Assistant tree, expand the controller, and then select the Driver page.
2 Scroll down to TouchScreen Control and verify that TouchScreen Schedule Edit Enable is checked.
CAUTION If scheduling will be done in the i-Vu® interface, you should disable scheduling in the TruVu™ ET
display so that they do not overwrite each other's schedules. To disable scheduling, uncheck
TouchScreen
Schedule Edit Enable.
To create a schedule
1 Touch on the System screen.
2 If the controller has multiple control programs that have a time clock microblock, touch the schedule object
that you want to add a schedule to.
3 Touch Add Schedule.
4 Touch the Schedule Name field, and enter a unique name.
5 Touch Schedule Type, and select one of the following:
• ON Schedule for an occupied period
• OFF Schedule for an unoccupied period that is to override an ON schedule. For example, a holiday
schedule that is to override a weekly schedule.
6 ON Schedule only–Select one of the following:
• Normal for a typical occupied period
• Override for a occupied period that is to override an OFF schedule.
Creating or viewing schedules
To Next Page
Loading...