TruVu™ ET display screens
TruVu™ ET Display (part# EQT3) ©2022 Carrier.
Installation and Start-up Guide All rights reserved.
16
The TruVu™ ET Display displays the system screens below, in addition to any custom-designed screens. System screens
live in the app.
To create custom screens, you must install ViewBuilder v7.0 or later with the latest cumulative patch. In ViewBuilder, add
the appropriate TruVu™ ET Display size to the Custom Touch Initialization Properties window as follows.
EQT3 - 7 1024 600 170
EQT3 - 10 1280 800 149
If you do not have custom screens, you cannot see any screens or buttons pertaining to module settings,
schedules, trends, or alarms, and you cannot change the current user.
Displays if the screen you selected requires a password. Enter your password, then touch
.
Each screen is programmed with one of the following password levels:
A screen requiring this
password level...
User A user logged in with the User, Admin, or Factory
password
Admin A user logged in with the Admin or Factory password
Factory A user logged in with the Factory password
No password Anyone
TruVu™ ET display screens