Appendix: Single Point Linkage and Device Address Binding
UPC Open Carrier Proprietary and Confidential CARRIER CORPORATION ©2017
Installation and Integration Guide All rights reserved
23
Device Address Binding
As described previously,
Device Address Binding
allows the UPC Open to receive data from other Open controllers
when they are connected by a network. You must configure this method.
Currently, the UPC Open allows Device Address Binding (DAB) only for System Space Temperature.
You can implement DAB on network points with an undefined BACnet address, displayed in Field Assistant and the
i-Vu® interface on the Properties page > Network Points tab. See example below.
To Next Page
Loading...
Need help?
General