Need help?Do you have a question about the Carrier UPC Open and is the answer not in the manual?
General| Form Factor | Standalone |
|---|---|
| Number of Ports | 1 |
| Connector Type | SC |
| Operating Temperature | 0°C to 50°C |
| Wavelength | 1310 nm |
| Fiber Type | Single Mode |
| Power Input | 5V DC |
| Humidity | 5% to 90% non-condensing |
Details on driver, programs, objects, power, ports, sensors, battery, protection, clock.
Instructions and precautions for physically mounting the UPC Open controller.
Guidance on connecting the UPC Open to a Class 2 power source, including polarity.
Procedures for setting a unique MAC address for the UPC Open on MS/TP or ARCNET networks.
Procedures for installing and wiring the Wireless Adapter for wireless sensors.
Process for loading custom control programs and graphics onto the UPC Open.
Steps to integrate the UPC Open into an i-Vu® Control System, including uploading.
Setting key properties like CCN communication status in the i-Vu® or Field Assistant.
Steps to reset the UPC Open to its original factory default settings.
To Next Page