24
3.2.4 Partition monitoring - Icon mode
You can switch to partition monitoring mode to view the details of the current partition
① Click the button of "Fully on/Fully off" to open all equipment in the building. Click "Fully Off" to close all
equipment in the current floor or building
② Partition monitoring , can quickly see the current partition name, the number of devices in the partition,
the number of running devices, shutdown devices, fault devices, offline devices, and the number of timing
tasks . Click the device area to enter the control mode
3.2.5 Partition monitoring - List mode
List mode allows you to quickly view partition information
① Click the button of "Fully on/Fully off" to open all equipment in the building. Click "Fully Off" to close all
equipment in the current floor or building
② Partition monitoring list, can quickly view the current partition name, the number of devices in the
partition, the number of running devices, shutdown devices, fault devices, offline devices, and the number of
timing tasks. Click the device area to enter the control mode
①
②
①
②
③
④
⑤
To Next Page
Loading...
