30
3.3.3 Fresh air unit interface
The new fan control interface is used to set the control state of the new fan
① Mode and air quality parameters display, showing the current operating mode,
② ON/OFF button .to switch ON and OFF the controller.
③ Fan speed control button, click to select fresh air unit fan speed
④ Order sending button. click the button to send the current control orders to all the selected
units .Click once to send the command and exit the current control interface.
⑤ Selection button. you can select the fresh air unit which you want to control.
①
③
②
⑤
④
To Next Page
Loading...
