42
Click "+" to manually add the indoor units, as shown in the popover below. When manually adding, all
parameter items are allowed to be modified. Click "OK" to add the device manually
③ Automatic online button，Click “ ”， to enter the automatic on-line process. Nothing else can be done
while the device is executing. After the on-line completion, it will automatically generate all the indoor units
that are currently on-line, but will not automatically delete the devices that are not currently on-line. Device
deletion can only be done manually.
④ Edit button，Click the device to enter the device editing interface. The device that has been generated
and saved can only modify specific parameters.
"Device Type/Device model/Bus Address. Gateway address/Device address" cannot be modified
To Next Page
Loading...
