43
3.7.3 fresh air duct commissioning interface
Fresh air duct commissioning, click "COM1/COM2" to update the bus, and automatically launch all Fresh air
duct under the current line, which are automatically grouped and named according to different gateways
① filter button，Click filter and select "All/edited/unedited" to improve commissioning efficiency
② Add/delete buttons，Click "-" to delete, and the interface pops up as shown in the figure below. Click the
corresponding indoor units to select the device to be deleted. After the selection, click "Complete" to delete
the selected device
Click "+" to manually add the indoor units, as shown in the popover below. When manually adding, all
parameter items are allowed to be modified. Click "OK" to add the device manually
①
②
③
④
To Next Page
Loading...
