Carver Pump GH - EC Declaration of Conformity

I-120
GH Pump 120 – 16.02.EN
MANUFACTURER: CARVER PUMP COMPANY
2415 PARK AVE.
MUSCATINE, IOWA, USA 52761
PRODUCT DESCRIPTION: 120 GH Pumps
PART NUMBER:
SERIAL NUMBER:
DATE MANUFACTURED:
APPLICABLE EUROPEAN DIRECTIVES:
Machinery: The designated product complies with the following basic requirements of Directive 2006/42/EC:
Appendix I, section 1.1.2, 1.1.3., 1.1.5., 1.3.1., 1.3.2., 1.3.3., 1.3.4., 1.3.7., 1.3.8., 1.4.1., 1.4.2.1., 1.5.1., 1.5.8.,
1.5.9., 1.5.13., 1.6.1., 1.6.4., 1.6.5., 1.7.
APPLICABLE HARMONIZED STANDARDS:
Machinery: EN ISO 12100:2010 EN ISO 13732-1:2008
EN 626-1:2008 EN ISO 13857:2008
Declaration of Incorporation of Partly Completed Machinery (valid for 120 pumps supplied without a motor)
The product described in this Declaration of Conformity complies with the Applicable European Directives, EHSRs and relevant
sections of the Applicable International Standards "as a Component". The incorporation of this pump with Electric Motors that
are marked to confirm that they comply with the Low Voltage Directive 2006/95/EC and all the necessary guards, must be
declared in conformity by the assembler.
Declaration of Conformity of Completed Machinery (valid for 120 pumps supplied complete with a motor)
The product described in this Declaration of Conformity complies with the Applicable European Directives, EHSRs and relevant
sections of the Applicable International Standards. Motors for CE marked pumps will have motors that are marked to confirm that
they comply with the Low Voltage Directive 2006/95/EC.
The special technical documentation has been complied according to Annex VII Part B of Directive 2006/42/EC, and will be made
available in electronic form to the authorities of the individual states upon justified request.
NOTE: The 120 pumps are NOT supplied or declared to ATEX Directive 94/9/EC.
Person authorized to compile the technical documentation:
Kurt Doren, Quality/ISO Manager, Carver Pump Company, 2415 Park Ave, Muscatine Iowa, USA 52761
Authorized Signature: Date:
Important safety information is contained in the installation, operation and service manuals; read and understand this
information prior to installing or using this equipment
This Document applies only to the equipment described above and is invalid if not reproduced in its entirety.
EC Declaration of Conformity
Kurt Doren
Quality/ ISO Manager
www.carverpump.com
Phone: 1-563-263-3410
Email: sales@carverpump.com