CAS BI Series - Rechargeable Battery Usage and Period; Battery: Rechargeable Usage Preparation; Battery: Rechargeable Charging Connection; Battery: Charging Status - Power Lamp

Battery
+
+
+
+
DRY RECH
GND
NO
C
RELAY
CN3
BATT
CN4
+
DRY
RECH
BATT
CN4
IN
CN2 RS232
EX EX
Rechargeable battery using and recharging
Open the top cover and make as follows in the left bottom of cover at
using the rechargeable battery.
Open the jack protecting cap in the back panel and connect the
adapter as follows.
When the adapter is connected with indicator, RED(Power) lamp is
ON.
When the battery is charging, RED lamp is ON at charge lamp part.
When the charging is completed, GREEN lamp is ON at charge
lamp part.
It takes approximately 4-5 hours to charge in full.
Adapter
+
+
+
+
DRY
RECH
GND
NO
C
RELAY
CN3
BATT
CN4
+
DRY
RECH
BATT
CN4
IN
CN2 RS232
EX
EX
Battery using period
Conditions Using period
BACK LIGHT(E.L) is
not used.
BACK LIGHT(E.L) is
always used
Recharging battery : Approx. 100 hours
Mn battery : Approx. 150 hours
Alkali battery : Approx. 300 hours
Recharging battery : Approx. 30 hours
Mn battery : Approx. 45 hours
Alkali battery : Approx. 90 hours
20
All manuals and user guides at all-guides.com