Need help?Do you have a question about the CAS BI-100D and is the answer not in the manual?
General| Brand | CAS |
|---|---|
| Model | BI-100D |
| Category | Accessories |
| Language | English |
Lists critical safety guidelines to ensure safe handling and operation of the indicator.
Explains how to reset the zero point of the scale for accurate measurements.
Details the procedure and application of the tare function for weighing.
Describes the automatic hold function that stabilizes and displays weight readings.
Details how to manually engage the hold function using the 'Hold' key.
Explains the physical connection and settings for RS-232C communication.
Defines the overall structure and content of data transmitted via RS-232C.
Guides on setting the maximum weighing capacity of the indicator.
Details on setting the minimum division for precise weight measurements.
Instructions for setting the span weight required for calibration.
Procedure for performing automatic zero calibration of the indicator.
Procedure for performing automatic span calibration of the indicator.
Explains common error messages during weighing and their management.
Covers errors related to zero range, overload, and capacity limits.
Details errors that can occur during calibration and their solutions.
Addresses weighing errors (Err 27-28) and count mode errors (Err 61-62).
To Next Page
