CAS 1560A User Manual

38
CONTENTS
PRECAUTIONS ............................................................. 4
INTRODUCTION ........................................................... 6
FEATURES .................................................................... 6
TECHNICAL SPECIFICATION ....................................... 7
MEASURE OF APPEARANCE ...................................... 8
FRONT PANEL ............................................................. 9
REAR PANEL ............................................................... 10
INSTALLATION & CONNECTION ................................. 11
TEST MODE ................................................................. 13
CALIBRATION MODE ................................................... 16
SET MODE ................................................................... 20
WEIGHING MODE ........................................................ 28
RS-232C INTERFACE/CLOCK ...................................... 32
ERROR MESSAGE AND TROUBLE SHOOTING .......... 36

CAS 1560A Specifications

General

Brand	CAS
Model	1560A
Category	Accessories
Language	English

Summary

Precautions

Technical Specification

Installation & Connection

Load Cell Connection Guide

Guide to connecting the load cell, including pinouts and wire colors.

Test Mode

Test Mode (Continued)

Calibration Mode

Function: Maximum Capacity Set

Procedure to set the maximum capacity of the scale.

Function: Minimum Division Set

Procedure to set the minimum division value for the scale.

Calibration Mode (Continued)

Function: Setting Weight in Span Calibration

Procedure to set the reference weight for span calibration.

Function: Zero Calibration

Steps for performing zero calibration on the scale.

Function: Span Calibration

Procedure for performing span calibration with a reference weight.

Set Mode

Set Value Conversion Menu

Overview of configurable parameters and their functions.

Function F20: Relay Mode Usage

Configuring relay mode usage for different functions (Limit, Checker, Packer).

Weighing Mode

Weighing Mode Entry and Key Usage

Example 2: Tare Function Usage

RS-232C Interface/Clock

RS-232C Configuration

Error Message & Trouble Shooting

Error 02: Load Cell Connection

Reason and troubleshooting for load cell connection failure.

Error 13: Zero Range Deviation

Reason and troubleshooting for zero range deviation.

Error OVER: Exceeding Max Capacity

Reason and troubleshooting for exceeding maximum capacity.

Error 21: Resolution Limit

Reason and troubleshooting for resolution limit errors in CAL mode.

Error 22: Setting Weight Too Low

Reason and troubleshooting for setting weight below 10% in CAL mode.

Error 24: Low Span Voltage

Reason and troubleshooting for low load cell voltage during span calibration.

Error 25: High Span Voltage

Reason and troubleshooting for high load cell voltage during span calibration.